Hydrophore PUMPS / SPK - SPL - SPS Series

• SPK-SPS-SPL series is designed for printing non-abrasive liquids that do not contain large solid particles.

• Impeller material is glass fiber reinforced noryl.

• They are closed impeller pumps whose vertical axis stage bodies can be separated.

• Balancing holes in the impellers minimize axial loads and are dynamically balanced.

• Cylindrical roller bearings that are resistant to high temperatures and can be operated under heavy conditions are used at both ends of the pump.

• The pump's discharge flange is on the motor side, and the suction flange is below.

• With its stance, it saves less space compared to its horizontal spindle.

• Quiet operation.

• They can be manufactured with 1, 2, 3 or more pumps depending on the need.

• They can be manufactured with three-phase motor.

• Phase protection and sequencing relay (FKS), electric float (float) are available in single pump booster sets.

• Equal aging feature (rotation).

• The boosters are ready for assembly as a complete package with expansion tank, connection set and control panel.

• Our models with suitable flow rates can be turned into fire booster pumps by attaching a weekly test device and an audible light alarm.

• Widespread dealer, service network and abundant spare parts.

MEKON MEKANİK KATALOG